In my previous post, I talked about the new VPN support for user-driven Hybrid Azure AD Join. I described the key VPN requirements: The VPN connection either needs to be automatically established (e.g. “always on”) or it needs to be one that the user can manually initiate from the Windows logon screen. Windows 10 Always On VPN is the replacement for Microsoft’s DirectAccess remote access technology. Always On VPN aims to address several shortcomings of DirectAccess, including support for Windows 10 Professional and non-domain joined devices, as well as cloud integration with Intune and Azure Active Directory.

1. Anyconnect Setup Vpn Windows 10
2. Cisco Anyconnect Always On Vpn Windows 10 Windows
3. Anyconnect Vpn For Windows 10
4. Cisco Anyconnect Always On Vpn Windows 10 Free
5. Windows 10 Always On Vpn Vs Cisco Anyconnect

-->

Applies to: Windows Server (Semi-Annual Channel), Windows Server 2016, Windows Server 2012 R2, Windows 10

• Previous: Step 5. Configure DNS and Firewall Settings
  

In this step, you'll learn about the ProfileXML options and schema, and configure the Windows 10 client computers to communicate with that infrastructure with a VPN connection.

You can configure the Always On VPN client through PowerShell, Microsoft Endpoint Configuration Manager, or Intune. All three require an XML VPN profile to configure the appropriate VPN settings. Automating PowerShell enrollment for organizations without Configuration Manager or Intune is possible.

Note

Group Policy does not include administrative templates to configure the Windows 10 Remote Access Always On VPN client. However, you can use logon scripts.

ProfileXML overview

ProfileXML is a URI node within the VPNv2 CSP. Rather than configuring each VPNv2 CSP node individually—such as triggers, route lists, and authentication protocols—use this node to configure a Windows 10 VPN client by delivering all the settings as a single XML block to a single CSP node. The ProfileXML schema matches the schema of the VPNv2 CSP nodes almost identically, but some terms are slightly different.

You use ProfileXML in all the delivery methods this deployment describes, including Windows PowerShell, Microsoft Endpoint Configuration Manager, and Intune. There are two ways to configure the ProfileXML VPNv2 CSP node in this deployment:

• OMA-DM. One way is to use an MDM provider using OMA-DM, as discussed earlier in the section VPNv2 CSP nodes. Using this method, you can easily insert the VPN profile configuration XML markup into the ProfileXML CSP node when using Intune.

• Windows Management Instrumentation (WMI)-to-CSP bridge. The second method of configuring the ProfileXML CSP node is to use the WMI-to-CSP bridge—a WMI class called MDM_VPNv2_01—that can access the VPNv2 CSP and the ProfileXML node. When you create a new instance of that WMI class, WMI uses the CSP to create the VPN profile when using Windows PowerShell and Configuration Manager.

Even though these configuration methods differ, both require a properly formatted XML VPN profile. To use the ProfileXML VPNv2 CSP setting, you construct XML by using the ProfileXML schema to configure the tags necessary for the simple deployment scenario. For more information, see ProfileXML XSD.

Below you find each of the required settings and its corresponding ProfileXML tag. You configure each setting in a specific tag within the ProfileXML schema, and not all of them are found under the native profile. For additional tag placement, see the ProfileXML schema.

Important

Any other combination of upper or lower case for 'true' in the following tags results in a partial configuration of the VPN profile:

<AlwaysOn>true</AlwaysOn>
<RememberCredentials>true</RememberCredentials>

Connection type: Native IKEv2

ProfileXML element:

Routing: Split tunneling

ProfileXML element:

Name resolution: Domain Name Information List and DNS suffix

ProfileXML elements:

Triggering: Always On and Trusted Network Detection

ProfileXML elements:

Authentication: PEAP-TLS with TPM-protected user certificates

ProfileXML elements:

You can use simple tags to configure some VPN authentication mechanisms. However, EAP and PEAP are more involved. The easiest way to create the XML markup is to configure a VPN client with its EAP settings, and then export that configuration to XML.

For more information about EAP settings, see EAP configuration.

Manually create a template connection profile

In this step, you use Protected Extensible Authentication Protocol (PEAP) to secure communication between the client and the server. Unlike a simple user name and password, this connection requires a unique EAPConfiguration section in the VPN profile to work.

Instead of describing how to create the XML markup from scratch, you use Settings in Windows to create a template VPN profile. After creating the template VPN profile, you use Windows PowerShell to consume the EAPConfiguration portion from that template to create the final ProfileXML that you deploy later in the deployment.

Record NPS certificate settings

Before creating the template, take note the hostname or fully qualified domain name (FQDN) of the NPS server from the server's certificate and the name of the CA that issued the certificate.

Procedure:

1. On your NPS server, open Network Policy Server.

2. In the NPS console, under Policies, click Network Policies.

3. Right-click Virtual Private Network (VPN) Connections, and click Properties.

4. Click the Constraints tab, and click Authentication Methods.

5. In EAP Types, click Microsoft: Protected EAP (PEAP), and click Edit.

6. Record the values for Certificate issued to and Issuer.

   You use these values in the upcoming VPN template configuration. For example, if the server's FQDN is nps01.corp.contoso.com and the hostname is NPS01, the certificate name is based upon the FQDN or DNS name of the server—for example, nps01.corp.contoso.com.

7. Cancel the Edit Protected EAP Properties dialog box.

8. Cancel the Virtual Private Network (VPN) Connections Properties dialog box.

9. Close Network Policy Server.

Note

If you have multiple NPS servers, complete these steps on each one so that the VPN profile can verify each of them should they be used.

Configure the template VPN profile on a domain-joined client computer

Now that you have the necessary information configure the template VPN profile on a domain-joined client computer. The type of user account you use (that is, standard user or administrator) for this part of the process does not matter.

However, if you haven't restarted the computer since configuring certificate autoenrollment, do so before configuring the template VPN connection to ensure you have a usable certificate enrolled on it.

Note

There is no way to manually add any advanced properties of VPN, such as NRPT rules, Always On, Trusted network detection, etc. In the next step, you create a test VPN connection to verify the configuration of the VPN server and that you can establish a VPN connection to the server.

Manually create a single test VPN connection

1. Sign in to a domain-joined client computer as a member of the VPN Users group.

2. On the Start menu, type VPN, and press Enter.

3. In the details pane, click Add a VPN connection.

4. In the VPN Provider list, click Windows (built-in).

5. In Connection Name, type Template.

6. In Server name or address, type the external FQDN of your VPN server (for example, vpn.contoso.com).

7. Click Save.

8. Under Related Settings, click Change adapter options.

9. Right-click Template, and click Properties.

10. On the Security tab, in Type of VPN, click IKEv2.

11. In Data encryption, click Maximum strength encryption.

12. Click Use Extensible Authentication Protocol (EAP); then, in Use Extensible Authentication Protocol (EAP), click Microsoft: Protected EAP (PEAP) (encryption enabled).

13. Click Properties to open the Protected EAP Properties dialog box, and complete the following steps:

    a. In the Connect to these servers box, type the name of the NPS server that you retrieved from the NPS server authentication settings earlier in this section (for example, NPS01).

    Note

    The server name you type must match the name in the certificate. You recovered this name earlier in this section. If the name does not match, the connection will fail, stating that 'The connection was prevented because of a policy configured on your RAS/VPN server.'

    b. Under Trusted Root Certification Authorities, select the root CA that issued the NPS server's certificate (for example, contoso-CA).

    c. In Notifications before connecting, click Don't ask user to authorize new servers or trusted CAs.

    d. In Select Authentication Method, click Smart Card or other certificate, and click Configure. The Smart Card or other Certificate Properties dialog opens.

    e. Click Use a certificate on this computer.

    f. In the Connect to these servers box, enter the name of the NPS server you retrieved from the NPS server authentication settings in the previous steps.

    g. Under Trusted Root Certification Authorities, select the root CA that issued the NPS server's certificate.

    h. Select the Don't prompt user to authorize new servers or trusted certification authorities check box.

    i. Click OK to close the Smart Card or other Certificate Properties dialog box.

    j. Click OK to close the Protected EAP Properties dialog box.

14. Click OK to close the Template Properties dialog box.

15. Close the Network Connections window.

16. In Settings, test the VPN by clicking Template, and clicking Connect.

Important

Make sure that the template VPN connection to your VPN server is successful. Doing so ensures that the EAP settings are correct before you use them in the next example. You must connect at least once before continuing; otherwise, the profile will not contain all the information necessary to connect to the VPN.

Create the ProfileXML configuration files

Before completing this section, make sure you have created and tested the template VPN connection that the section Manually create a template connection profile describes. Testing the VPN connection is necessary to ensure that the profile contains all the information required to connect to the VPN.

The Windows PowerShell script in Listing 1 creates two files on the desktop, both of which contain EAPConfiguration tags based on the template connection profile you created previously:

• VPN_Profile.xml. This file contains the XML markup required to configure the ProfileXML node in the VPNv2 CSP. Use this file with OMA-DM–compatible MDM services, such as Intune.

• VPN_Profile.ps1. This file is a Windows PowerShell script that you can run on client computers to configure the ProfileXML node in the VPNv2 CSP. Peer to peer downloads. You can also configure the CSP by deploying this script through Configuration Manager. You cannot run this script in a Remote Desktop session, including a Hyper-V enhanced session.

Important

The example commands below require Windows 10 Build 1607 or later.

Create VPN_Profile.xml and VPN_Proflie.ps1

1. Sign in to the domain-joined client computer containing the template VPN profile with the same user account that the section Manually create a template connection profile described.

2. Paste Listing 1 into Windows PowerShell integrated scripting environment (ISE), and customize the parameters described in the comments. These are $Template, $ProfileName, $Servers, $DnsSuffix, $DomainName, $TrustedNetwork, and $DNSServers. A full description of each setting is in the comments.

3. Run the script to generate VPN_Profile.xml and VPN_Profile.ps1 on the desktop.

Listing 1. Understanding MakeProfile.ps1

This section explains the example code that you can use to gain an understanding of how to create a VPN Profile, specifically for configuring ProfileXML in the VPNv2 CSP.

After you assemble a script from this example code and run the script, the script generates two files: VPN_Profile.xml and VPN_Profile.ps1. Use VPN_Profile.xml to configure ProfileXML in OMA-DM compliant MDM services, such as Microsoft Intune.

Use the VPN_Profile.ps1 script in Windows PowerShell or Microsoft Endpoint Configuration Manager to configure ProfileXML on the Windows 10 desktop.

Note

To view the full example script, see the section MakeProfile.ps1 Full Script.

Parameters

Configure the following parameters:

$Template. The name of the template from which to retrieve the EAP configuration.

$ProfileName. Unique alphanumeric identifier for the profile. The profile name must not include a forward slash (/). If the profile name has a space or other non-alphanumeric character, it must be properly escaped according to the URL encoding standard.

$Servers. Public or routable IP address or DNS name for the VPN gateway. It can point to the external IP of a gateway or a virtual IP for a server farm. Examples, 208.147.66.130 or vpn.contoso.com.

$DnsSuffix. Specifies one or more commas separated DNS suffixes. The first in the listis also used as the primary connection-specific DNS suffix for the VPN Interface. The entire list will also be added into the SuffixSearchList.

$DomainName. Used to indicate the namespace to which the policy applies. When a Name query is issued, the DNS client compares the name in the query to all of the namespaces under DomainNameInformationList to find a match. This parameter can be one of the following types:

• FQDN - Fully qualified domain name
• Suffix - A domain suffix that will be appended to the shortname query for DNS resolution. To specify a suffix, prepend a period (.) to the DNS suffix.

$DNSServers. List of comma-separated DNS Server IP addresses to use for the namespace.

$TrustedNetwork. Comma-separated string to identify the trusted network. VPN does not connect automatically when the user is on their corporate wireless network where protected resources are directly accessible to the device.

The following are example values for parameters used in the commands below. Ensure that you change these values for your environment.

Prepare and create the profile XML

The following example commands get EAP settings from the template profile:

Create the profile XML

Important

Any other combination of upper or lower case for 'true' in the following tags results in a partial configuration of the VPN profile:

<AlwaysOn>true</AlwaysOn>
<RememberCredentials>true</RememberCredentials>

Output VPN_Profile.xml for Intune

You can use the following example command to save the profile XML file:

Output VPN_Profile.ps1 for the desktop and Configuration Manager

The following example code configures an AlwaysOn IKEv2 VPN Connection by using the ProfileXML node in the VPNv2 CSP.

You can use this script on the Windows 10 desktop or in Configuration Manager.

Define key VPN profile parameters

Escape special characters in the profile

Define WMI-to-CSP Bridge properties

Determine user SID for VPN profile:

Define WMI session:

Detect and delete previous VPN profile:

Create the VPN profile:

Save the profile XML file

MakeProfile.ps1 Full Script

Most examples use the Set-WmiInstance Windows PowerShell cmdlet to insert ProfileXML into a new instance of the MDM_VPNv2_01 WMI class.

However, this does not work in Configuration Manager because you cannot run the package in the end users' context. Therefore, this script uses the Common Information Model to create a WMI session in the user's context, and then it creates a new instance of the MDM_VPNv2_01 WMI class in that session. This WMI class uses the WMI-to-CSP bridge to configure the VPNv2 CSP. Therefore, by adding the class instance, you configure the CSP.

Important

WMI-to-CSP bridge requires local admin rights, by design. To deploy per user VPN profiles you should be using Configuration Manager or MDM.

Note

The script VPN_Profile.ps1 uses the current user's SID to identify the user's context. Because no SID is available in a Remote Desktop session, the script does not work in a Remote Desktop session. Likewise, it does not work in a Hyper-V enhanced session. If you're testing a Remote Access Always On VPN in virtual machines, disable enhanced session on your client VMs before running this script.

The following example script includes all of the code examples from previous sections. Ensure that you change example values to values that are appropriate for your environment.

Configure the VPN client by using Windows PowerShell

To configure the VPNv2 CSP on a Windows 10 client computer, run the VPN_Profile.ps1 Windows PowerShell script that you created in the Create the profile XML section. Open Windows PowerShell as an Administrator; otherwise, you'll receive an error saying, Access denied.

After running VPN_Profile.ps1 to configure the VPN profile, you can verify at any time that it was successful by running the following command in the Windows PowerShell ISE:

Successful results from the Get-WmiObject cmdlet

The ProfileXML configuration must be correct in structure, spelling, configuration, and sometimes letter case. If you see something different in structure to Listing 1, the ProfileXML markup likely contains an error.

If you need to troubleshoot the markup, it is easier to put it in an XML editor than to troubleshoot it in the Windows PowerShell ISE. In either case, start with the simplest version of the profile, and add components back one at a time until the issue occurs again.

Configure the VPN client by using Configuration Manager

In Configuration Manager, you can deploy VPN profiles by using the ProfileXML CSP node, just like you did in Windows PowerShell. Here, you use the VPN_Profile.ps1 Windows PowerShell script that you created in the section Create the ProfileXML configuration files.

To use Configuration Manager to deploy a Remote Access Always On VPN profile to Windows 10 client computers, you must start by creating a group of machines or users to whom you deploy the profile. In this scenario, create a user group to deploy the configuration script.

Create a user group

1. In the Configuration Manager console, open Assets and ComplianceUser Collections.

2. On the Home ribbon, in the Create group, click Create User Collection.

3. On the General page, complete the following steps:

   a. In Name, type VPN Users.

   b. Click Browse, click All Users and click OK.

   c. Click Next.

4. On the Membership Rules page, complete the following steps:

   a. In Membership rules, click Add Rule, and click Direct Rule. In this example, you're adding individual users to the user collection. However, you might use a query rule to add users to this collection dynamically for a larger-scale deployment.

   b. On the Welcome page, click Next.

   c. On the Search for Resources page, in Value, type the name of the user you want to add. The resource name includes the user's domain. To include results based on a partial match, insert the % character at either end of your search criterion. For example, to find all users containing the string 'lori,' type %lori%. Click Next.

   d. On the Select Resources page, select the users you want to add to the group, and click Next.

   e. On the Summary page, click Next.

   f. On the Completion page, click Close.

5. Back on the Membership Rules page of the Create User Collection Wizard, click Next.

6. On the Summary page, click Next.

7. On the Completion page, click Close.

After you create the user group to receive the VPN profile, you can create a package and program to deploy the Windows PowerShell configuration script that you created in the section Create the ProfileXML configuration files.

Create a package containing the ProfileXML configuration script

1. Host the script VPN_Profile.ps1 on a network share that the site server computer account can access.

2. In the Configuration Manager console, open Software LibraryApplication ManagementPackages.

3. On the Home ribbon, in the Create group, click Create Package to start the Create Package and Program Wizard.

4. On the Package page, complete the following steps:

   a. In Name, type Windows 10 Always On VPN Profile.

   b. Select the This package contains source files check box, and click Browse.

   c. In the Set Source Folder dialog box, click Browse, select the file share containing VPN_Profile.ps1, and click OK.Make sure you select a network path, not a local path. In other words, the path should be something like fileservervpnscript, not c:vpnscript.

5. Click Next.

6. On the Program Type page, click Next.

7. On the Standard Program page, complete the following steps:

   a. In Name, type VPN Profile Script.

   b. In Command line, type PowerShell.exe -ExecutionPolicy Bypass -File 'VPN_Profile.ps1'.

   c. In Run mode, click Run with administrative rights.

   d. Click Next.

8. On the Requirements page, complete the following steps:

   a. Select This program can run only on specified platforms.

   b. Select the All Windows 10 (32-bit) and All Windows 10 (64-bit) check boxes.

   c. In Estimated disk space, type 1.

   d. In Maximum allowed run time (minutes), type 15.

   e. Click Next.

9. On the Summary page, click Next.

10. On the Completion page, click Close.

With the package and program created, you need to deploy it to the VPN Users group.

Deploy the ProfileXML configuration script

1. In the Configuration Manager console, open Software LibraryApplication ManagementPackages.

2. In Packages, click Windows 10 Always On VPN Profile.

3. On the Programs tab, at the bottom of the details pane, right-click VPN Profile Script, click Properties, and complete the following steps:

   a. On the Advanced tab, in When this program is assigned to a computer, click Once for every user who logs on.

   b. Click OK.

4. Right-click VPN Profile Script and click Deploy to start the Deploy Software Wizard.

5. On the General page, complete the following steps:

   a. Beside Collection, click Browse.

   b. In the Collection Types list (top left), click User Collections.

   c. Click VPN Users, and click OK.

   d. Click Next.

6. On the Content page, complete the following steps:

   a. Click Add, and click Distribution Point.

   b. In Available distribution points, select the distribution points to which you want to distribute the ProfileXML configuration script, and click OK.

   c. Click Next.

7. On the Deployment settings page, click Next.

8. On the Scheduling page, complete the following steps:

   a. Click New to open the Assignment Schedule dialog box.

   b. Click Assign immediately after this event, and click OK.

   c. Click Next.

9. On the User Experience page, complete the following steps:

   1. Select the Software Installation check box.

   2. Click Summary.

10. On the Summary page, click Next.

11. On the Completion page, click Close.

With the ProfileXML configuration script deployed, sign in to a Windows 10 client computer with the user account you selected when you built the user collection. Verify the configuration of the VPN client.

Note

The script VPN_Profile.ps1 does not work in a Remote Desktop session. Likewise, it does not work in a Hyper-V enhanced session. If you're testing a Remote Access Always On VPN in virtual machines, disable enhanced session on your client VMs before continuing.

Verify the configuration of the VPN client

1. In Control Panel, under SystemSecurity, click Configuration Manager.

2. In the Configuration Manager Properties dialog, on the Actions tab, complete the following steps:

   a. Click Machine Policy Retrieval & Evaluation Cycle, click Run Now, and click OK.

   b. Click User Policy Retrieval & Evaluation Cycle, click Run Now, and click OK.

   c. Click OK.

3. Close the Control Panel.

You should see the new VPN profile shortly.

Configure the VPN client by using Intune

To use Intune to deploy Windows 10 Remote Access Always On VPN profiles, you can configure the ProfileXML CSP node by using the VPN profile you created in the section Create the ProfileXML configuration files, or you can use the base EAP XML sample provided below.

Note

Intune now uses Azure AD groups. If Azure AD Connect synced the VPN Users group from on-premises to Azure AD, and users are assigned to the VPN Users group, you are ready to proceed.

Create the VPN device configuration policy to configure the Windows 10 client computers for all users added to the group. Since the Intune template provides VPN parameters, only copy the <EapHostConfig> </EapHostConfig> portion of the VPN_ProfileXML file.

Create the Always On VPN configuration policy

1. Sign into the Azure portal.

2. Go to Intune > Device Configuration > Profiles.

3. Click Create Profile to start the Create profile Wizard.

4. Enter a Name for the VPN profile and (optionally) a description.

5. Under Platform, select Windows 10 or later, and choose VPN from the Profile type drop-down.

   Tip

   If you are creating a custom VPN profileXML, see Apply ProfileXML using Intune for the instructions.

6. Under the Base VPN tab, verify or set the following settings:

   • Connection name: Enter the name of the VPN connection as it appears on the client computer in the VPN tab under Settings, for example, Contoso AutoVPN.

   • Servers: Add one or more VPN servers by clicking Add.

   • Description and IP Address or FQDN: Enter the description and IP Address or FQDN of the VPN server. These values must align with the Subject Name in the VPN server's authentication certificate.

   • Default server: If this is the default VPN server, set to True. Doing this enables this server as the default server that devices use to establish the connection.

   • Connection type: Set to IKEv2.

   • Always On: Set to Enable to connect to the VPN automatically at the sign-in and stay connected until the user manually disconnects.

   • Remember credentials at each logon: Boolean value (true or false) for caching credentials. If set to true, credentials are cached whenever possible.

7. Copy the following XML string to a text editor:

   Important

   Any other combination of upper or lower case for 'true' in the following tags results in a partial configuration of the VPN profile:

   <AlwaysOn>true</AlwaysOn>
   <RememberCredentials>true</RememberCredentials>

8. Replace the <TrustedRootCA>5a 89 fe cb 5b 49 a7 0b 1a 52 63 b7 35 ee d7 1c c2 68 be 4b</TrustedRootCA> in the sample with the certificate thumbprint of your on-premises root certificate authority in both places.

   Important

   Do not use the sample thumbprint in the <TrustedRootCA></TrustedRootCA> section below. The TrustedRootCA must be the certificate thumbprint of the on-premises root certificate authority that issued the server-authentication certificate for RRAS and NPS servers. This must not be the cloud root certificate, nor the intermediate issuing CA certificate thumbprint.

9. Replace the <ServerNames>NPS.contoso.com</ServerNames> in the sample XML with the FQDN of the domain-joined NPS where authentication takes place.

10. Copy the revised XML string and paste into the EAP Xml box under the Base VPN tab and click OK.An Always On VPN Device Configuration policy using EAP is created in Intune.

Sync the Always On VPN configuration policy with Intune

To test the configuration policy, sign in to a Windows 10 client computer as the user you added to the Always On VPN Users group, and then sync with Intune.

1. On the Start menu, click Settings.

2. In Settings, click Accounts, and click Access work or school.

3. Click the MDM profile, and click Info.

4. Click Sync to force an Intune policy evaluation and retrieval.

5. Close Settings. After synchronization, you see the VPN profile available on the computer.

Next steps

You are done deploying Always On VPN. For other features you can configure, see the table below:

If you want to..	Then see..
Configure Conditional Access for VPN	Step 7. (Optional) Configure conditional access for VPN connectivity using Azure AD: In this step, you can fine-tune how authorized VPN users access your resources using Azure Active Directory (Azure AD) conditional access. With Azure AD conditional access for virtual private network (VPN) connectivity, you can help protect the VPN connections. Conditional Access is a policy-based evaluation engine that lets you create access rules for any Azure Active Directory (Azure AD) connected application.
Learn more about the advanced VPN features	Advanced VPN Features: This page provides guidance on how to enable VPN Traffic Filters, how to configure Automatic VPN connections using App-Triggers, and how to configure NPS to only allow VPN Connections from clients using certificates issued by Azure AD.

When you are off campus, some of Illinois State University’s electronic services are unavailable to you unless you establish a VPN connection.

Cisco AnyConnect is an application that the University makes available to students, faculty, and staff for free which may be used to establish a VPN connection with the University from off campus.

NOTE: If you need to request and install the application on your computer, please skip to the section further below entitled Download and Install Cisco AnyConnect. If you already have the application installed and would like to know how to connect to it, please read the section immediately below entitled Connect to the Cisco AnyConnect VPN Client Once Downloaded. The instructions below are listed for both Windows and Mac machines, respectively.

Connect to the Cisco AnyConnect VPN Client Once Downloaded

Windows:

Anyconnect Setup Vpn Windows 10

1. Open the Cisco AnyConnect VPN client.

• Windows 8: On the Start screen, click Cisco AnyConnect Secure Mobility Client.
• Windows 10: Start > All Apps > Cisco > Cisco AnyConnect Secure Mobility Client.
• Alternatively, you can click Start and begin typing Cisco AnyConnect Secure Mobility Client and the application will show up. Click on the icon to start the application.

2. Verify that the path in the field underneath “Ready to connect.” is VPN01.ILSTU.EDU.

• If the path name does not automatically appear, click the arrow to the right of the field and select VPN01.ILSTU.EDU from the drop down menu, or enter the path name manually.

3. Click Connect.

Figure 1:

4. When prompted, select the appropriate Group (Figure 1):

• To access most ISU resources, you will select –ISU-.
• Important: To access ISU Oracle or SQL database resources directly (via software such as Microsoft Access, Oracle SQL Developer, Microsoft SQL Management Studio, etc.), select DB-User_Access.

Note: When you attempt to connect, you may receive a prompt that tells you that Cisco AnyConnect is updating. Do not attempt to cancel this update, as this update will allow your VPN software to work.

Figure 2:

5. Enter your ULID and password in the appropriate fields, then click OK.
6. After a moment, an informational banner window will appear that typically says “Welcome to Illinois State University,” but could display a different, informational message.
7. Click Accept.

You are now connected with the Cisco AnyConnect VPN client. A Cisco AnyConnecticon with a yellow, locked padlock will be visible in your system tray (in the lower-right corner of your desktop, next to the clock). This indicates that you are connected. If the icon appears without a padlock, this indicates you are no longer connected through VPN.

Mac OS X:

1. Open the Cisco AnyConnect VPN client. Click Finder > Applications> Cisco > Cisco AnyConnect Secure Mobility Client.

Figure 3:

• Alternatively, you can search for the application in your “Dashboard” by simply clicking the rocket icon on your bottom toolbar. After that, start typing Cisco AnyConnect Secure Mobility Client and you will see the application. Click on the application to start the set-up process, or to access it once you’ve configured the settings properly.

Figure 4:

2. Verify that the path in the field underneath “Ready to connect.” reads VPN01.ILSTU.EDU. If the field is empty, you will need to manually enter the file path exactly how it is shown in this article.

Figure 5:

3. Click Connect.
4. When prompted, select the appropriate Group (Figure 6):

• For most ISU resources, you will select –ISU-.
• Important: To access ISU Oracle or SQL database resources directly (via software such as Microsoft Access, Oracle SQL Developer, Microsoft SQL Management Studio, etc.), select DB-User_Access.

Figure 6:

5. Enter your ULID and password when prompted to do so and click Connect.
6. After a moment, an informational banner window will appear that typically says “Welcome to Illinois State University,” but could display a different, informational message.
7. Click Accept.

You are now connected with the Cisco AnyConnect VPN client. A Cisco AnyConnect icon with a yellow, locked padlock is now in your system tray (in the lower-right corner of your desktop). This indicates that you are connected. If the icon appears without a padlock, this indicates you are no longer connected through VPN.

Disconnect from the VPN

Windows:

To disconnect from the VPN on a Window’s machine:

Cisco Anyconnect Always On Vpn Windows 10 Windows

1. Locate the Cisco AnyConnect VPN client icon and click on it. It is usually on your toolbar, but if it is not, here are some additional ways to find the application:

• Windows 8: On the Start screen, click Cisco AnyConnect Secure Mobility Client.
• Windows 10: Start > All Apps > Cisco > Cisco AnyConnect.
  • Alternatively, you can click [Start] and begin typing Cisco AnyConnect Secure Mobility Client and the application will show up. Click on the icon to start the application so you can disconnect from the VPN.

2. In the Cisco AnyConnect Secure Mobility Client pane, click Disconnect.

Figure 7:

3. Close Cisco AnyConnect Secure Mobility Client.

You are now disconnected from VPN.

Anyconnect Vpn For Windows 10

Mac OSX:

To disconnect from a VPN connection on Cisco AnyConnect on Mac running Mac OS X or later:

1. Click on the Cisco AnyConnect icon in your Dock.
2. Click Disconnect.
3. Close Cisco AnyConnect Secure Mobility Client.

Figure 8:

You are now disconnected from VPN.

Download and Install Cisco AnyConnect for Windows or Mac OS X

Students, faculty, and staff may download the Cisco AnyConnect VPN Client for Windows or Mac OS X from the University IT Help portal by following the directions below:

Windows:

1. Navigate to the IT Help portal (at ITHelp.IllinoisState.edu),
2. Click Downloads in the middle of the screen.
3. Under Cisco AnyConnect, select the version you would like to download. You will need to select the version that is compatible with your machine. You can choose either Windows or Mac.
4. Click on Windows or Mac and log in with your ULID and password if prompted to do so. You will be directed to a form to request the download file be sent to you. You will need to fill out the required fields in the submission form. Once submitted, your request will be handled in the order it was received. Once approved, you will receive an email. You will then click Download Files and you may be navigated to a Central Login page where you will need to enter your ULID and password. Once you log in, click the file next to Attached Files.

NOTE: If you have never access Liquid Files (SendTo) before, you may see a log in page to log into Liquid Files itself. Instead, you will want to click the SSO Sign In button to be navigated to a Central Login page. You will enter your ULID and password. Upon logging in, you will need to accept some terms and conditions. Once you have done that, you will never be prompted again for an SSO sign in.

• Upon successfully downloading the installer, you will need to open the installer and follow the prompts.

Figure 9:

• Agree to the Terms and Conditions and proceed with the installation by clicking Accept. You may need to enter your computer’s profile credentials in order to accept the installation.

Figure 10:

• Once the software has finished downloading, click Finish to close out of the installation process. You can now access the VPN software.

Mac OS X:

1. Navigate to the IT Help portal (at ITHelp.IllinoisState.edu),
2. Click Downloads in the middle of the screen.
3. Under Cisco AnyConnect, select the version you would like to download. You will need to select the version that is compatible with your machine. You can choose either Windows or Mac.
4. Click on Windows or Mac and log in with your ULID and password if prompted to do so. You will be directed to a form to request the download file be sent to you. You will need to fill out the required fields in the submission form. Once submitted, your request will be handled in the order it was received. Once approved, you will receive an email. You will then click Download Files and you may be navigated to a Central Login page where you will need to enter your ULID and password. Once you log in, click the file next to Attached Files.

NOTE: If you have never access Liquid Files (SendTo) before, you may see a log in page to log into Liquid Files itself. Instead, you will want to click the SSO Sign In button to be navigated to a Central Login page. You will enter your ULID and password. Upon logging in, you will need to accept some terms and conditions. Once you have done that, you will never be prompted again for an SSO sign in.

• Upon successfully downloading the installer, you will need to open the installer and follow the prompts. When you get to the Installation Type screen, ensure that only the VPN checkbox is selected, then click Continue to proceed with the installation

Figure 11:

Cisco Anyconnect Always On Vpn Windows 10 Free

• Click Continue to finish the installation. Once finished, open the Cisco AnyConnect Secure Mobility Client. You can find it in the Cisco folder in your applications, or can be manually searched in your Launchpad, as instructed above.

Figure 12:

• Type VPN01.ILSTU.EDU in the empty text field, then press Connect.

Windows 10 Always On Vpn Vs Cisco Anyconnect

Figure 13:

• Enter your ULID in the Username field and your current password in the Password field. Click OK.

Figure 14:

• You will see a welcome window. Click Accept to be connected to the VPN.

Figure 15:

• Now that you are connected, you will be able to access university-restricted applications such as iPeople.
• When you are ready to disconnect from the VPN, go back to the application and click Disconnect and close out of the application.

Figure 16:

How to Get Help

For technical assistance, you may contact the Technology Support Center at 309-438-4357 or by email at SupportCenter@IllinoisState.edu.

Back to Overview:

Related Articles: